AR SMOOTH FLITE 16 RRS, Руководство пользователя, Страница: 26 / 61

26
Telemetry with SBUS2 Receivers
Smooth Flite RRS comes with the added ability of downlink telemetry when using a 7008SB or 7003SB SBUS/
SBUS2 receiver.
Note: In order to receive telemetry via Smooth Flite, you must plug the receiver signal into the SBUS2 port.
Please ensure that the primary receiver (first bound receiver in a dual receiver setup) is plugged into the R1
port on the Smooth Flite. To check which receiver is the primary receiver, please consult your transmitter
manual for reference.
Step 1
Ensure your receivers are plugged into the SBUS2
port.
Step 2
Ensure that the Smooth Flite is on and both
receivers are bound to your transmitter.
Step 3
Ensure your transmitter is turned on,
Note: For the following steps we will be using the
18SZ as an example. For all other radios please
consult your transmitter manual.
Select the linkage menu on your transmitter.
Now select the sensor menu
Step 4
Page across until you see sensor slot 24,
Assign Curr. F1678 to this slot.
Step 5
Page across to slot 27
Assign Curr. F1678 to this slot.
Step 6
Now go to your telemetry screen, you should see the
current used in mAhs and the Voltage of both
Receiver packs.
Note: Both batteries must be plugged into the
Smooth Flite unit to receive voltage up
- dates.
Other telemetry systems are similar in how the con-
nect with the Smooth Flite System. We also offer
“ How To ” videos Advanced Radio YouTube channel.
https://www.youtube.com/channel/
UCY_uLkfkMiO3OWU8jLm3jZQ?view_as=subscriber