AR SMOOTH FLITE 16 RRS Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 61

AR SMOOTH FLITE 16 RRS Скачать руководство пользователя страница 29

29

Smooth Flite Gyro Menus

Smooth Flite is much more than just a simple Gyro system. It provides an intelligent system that calcu-
lates parameters from 4 different sensors to predict the nature of the model to provide, well, the
smoothest flying characteristic available today. Smooth Flite combines a 3 axis Gyro, Accelerometer,
Compass and Barometer, to provide for more advanced understanding of a model

’

s flight characteristics.

To make setup of the Smooth Flite system simple we have included a Wizard which will guide you through
the setup process and ensure you have the smoothest flying model. Before we start the Wizard we will
give you a description of each page of the Smooth Flite
System. You can jump straight to the Wizard feature if
you like but please read the pre

-

flight checks before you

fly the model.

Lets get started

To access the Smooth Flite menu from the main menu
tap the

[Smooth Flite]

button. This will take you to the

Smooth Flite main Menu (shown below). Lets take a
look at the various Smooth Flite menu options.

Return button

Returns you to the main menu

Wizard button

This button will start the setup Wizard and guide
you through the setup process.

Chan Assign button

The Channel Assignment button will take you the
setup page for channel assignment to Aileron 1 Ai-
leron 2, Elevator, and Rudder as well as Master ON/
OFF switch and Variable gain Control Channel. We
will talk more about these later.

Aileron, Elevator and Rudder buttons

These buttons take you to setup pages for, you
guessed it, Ailerons, Elevators and Rudder

Max Travel button

This button will take you to the travel setup
page where we set up travel limits for gyro cor-
rections. More about this later.

Model Type button

Takes you to the model setup page where we
specify the model type, and weight. These pa-
rameters are used in inertia and vibration
dampening calculations and are unique to the
Smooth Flite system.

Advanced button

Takes you to the advanced menu for specific
model setups and delving deeper into the
Smooth Flite system.

«
...
27
28
29
30
31
...
»

Содержание SMOOTH FLITE 16 RRS






























































Отзывы:

Нет отзывов