Aquant BLM100, Инструкция по установке и эксплуатации

Страница: 21 / 26

14
5
、
Indoor Installations
See Figure 1 (Standard plumbing Layout, Indoor)
SENSORS
Figure 1
TO POOL OR SPA
CHEMICAL
FEEDER
CHEMCAL LOOP OR
OPTIONAL CHLORINE
GENERATION SYSTEM
(JANDY AQUAPURE
SHOWN)
CHECK
VALVE
FROM POOL SPA
POOL PUMP
FILTER
POOL HEATER
5.1
、
Condensation and Drainage
Condensation from the evaporator coil will occur while the unit is running, depending
upon ambient air temperature and humidity. The more humid the ambient conditions
the more condensation will be produced. For indoor installations, a means of
condensate disposal must be provided. The drain hole in the base of the heat pump is
fitted with a 19mm diameter barbed adapter and route it to dispose of the condensate
into a drain or outside of the building.
NOTE
：
It is important to remember that no part of the tubing or hose may be above
the level of the drain hole in the base of the heat pump.
5.2
、
Check Valve Installation
The inlet/outlet header of the heat pump comes equipped with an internal
automatic flow control valve. The automatic flow control valve maintains the proper
flow through the heat pump.
○ ! NOTE: Excess water flow will damage the heat exchanger.
6
、
Filtration System Layouts
6.1
、
Shared Filtration System