Rise Digital Bath
installation instuctions
page 11
Commissioning
With the bath plug in, push and hold the
start/stop button for 3 seconds to invoke
memory run time record mode.
1
The LED’S will flash constantly when in record
mode, regardless of whether the system has
reached the desired temperature.
!
When the bath water level has reached the desired height, press the start/stop
button to turn off the bath fill.
2
The amended run time has been recorded.
3
The Rise Digital bath product has a factory set maximum run time of 12 minutes.
If required this can be adjusted anywhere from 1 second up to 30 minutes to suit
the site conditions by adopting the following procedure.
!
Due to the performance characteristics of combination boilers, seasonal
temperature change will affect bath flow rate. This in turn may affect bath
depth level.
!
