Rise Digital Bath
installation instuctions
page 13
Connect the bath waste to a suitable waste pipe.
5
Offer the outlet body assembly into position at
the rear of the bath ensuring the rubber washer
is correct aligned between the outlet body
assembly and bath wall.
6
Ensuring the rubber washer is correctly aligned,
pass the overflow filler outlet through the bath
and secure to the body assembly.
7
Remove the relevant inlet blanking plug and
attach the flexible hose to the blended inlet
connection.
8
Connect the flexible hose to the blended supply pipe ensuring suitable non
restrictive double check valves are fitted in line with current Water Supply
Regulations (not supplied).
9
Waste pipe extension kit
If required, for larger baths, a 900mm waste pipe conversion kit is available
from Aqualisa Customer Service department. Please contact customer services
on 01959 560010.
Unscrew the clamping nut and remove the
waste pipe from the waste assembly.
!
1