background image

Aquarian Thermo 

installation instuctions

page 11

Lubricate the supply pipe ends using a suitable

silicone based lubricant and run a thin bead of

silicone sealant in the mastic groove of the back

plate. Slide the assembly down the projecting

pipes flush to the wall surface ensuring the hot

and cold markings are uppermost. 

Secure to the wall using the screws provided.

11

The installation may now be checked for leaks. Turn the on/off knob 

(left hand knob) fully forwards to ensure the valve is fully turned off. 

If possible, ensure the shower can discharge safely to waste. 

12

Turn on the supplies and check for any leaks

upstream of the valve. Slowly open the on/off

control and check for leaks downstream of the

valve. If all is sound, turn off the on/off knob

fully and turn off the supplies. 

13

Refit the lower shroud by locating the lugs into the back plate and moving

the shroud into position. Align the fixing screws with the screw holes, and fix

into place ensuring not to overtighten the fixing screws. 

14

Refit the cartridge to the back plate.

10

Locate the bottom outlet blanking cap 

(supplied in the screwpack) into the lower

shroud and click into position.

15

Содержание Aquarian Thermo




















Отзывы: