Aquarian Thermo
installation instuctions
page 12
Refit the upper shroud assembly by locating
the lugs into the back plate and moving the
shroud down into position. Fix using the
centrally located locking screw taking care
not to overtighten.
16
Remove the paper backing from the badge
and push firmly into position in the recess in
the shroud assembly.
17
Reversed supplies
The Aquarian Thermo is designed for conventional supplies with HOT on the Left and
COLD on the Right as viewed from the front. However, the Aquarian Thermo can be
adapted for use with reversed supplies, but it will be necessary to contact Aqualisa
customer services on 01959 560010 to purchase reversed graphics to enable this
operation.
Remove the shrouds and cartridge assembly from the backplate as detailed
overleaf.
1
Make a note of the orientation of the settings
and the position of the on/off knob before
removing the fixing screw and pulling the knob
clear.
2
Rotate the cartridge assembly 180º so the
hot and cold temperature markings on the top
of the cartridge assembly are now positioned
on the bottom of the cartridge.
3
