Aquarian Thermo
installation instuctions
page 6
Step -by-step instructions
In addition to the guide below it is essential that the written instructions
overleaf are read and understood and that you have all the necessary
components (shown overleaf) before commencing installation. Failure to
install the product in accordance with these instructions may adversely affect
the warranty terms and conditions. Do not undertake any part of this
installation unless you are competent to do so. Prior to starting, ensure that
you are familiar with the necessary plumbing regulations required to install
the product correctly and safely.
The Aquarian Thermo is supplied with universal fixings.
!
Surface mounted flexible system
In most cases for hollow wall fixing it will be
necessary to first install a suitable sound fixing
surface within the cavity area before fixing the
valve. Mark out the position of the pipe work
entry points using the template provided. The
15mm supplies must emerge from the wall at
right angles at 150mm pipe centres.
The template may also be temporarily secured to the wall to ensure correct
orientation of the pipe work during making good if required.
1
After making good, using the template, mark and prepare the four fixing
points as outlined above.
IT IS ESSENTIAL THAT THE WALL SURFACE IS FLAT AND EVEN TO AVOID
DISTORTION OF THE SHOWER BACK PLATE.
2
Remove the fixing screw from the centre of the valve fascia and carefully lift
the upper shroud assembly clear from the back plate.
3
