Aqua ZL 10.5, Руководство пользователя, Страница: 18 / 19

AQUA Sauna Heater
18 E002B-23-10-12
Door LED is on
During the advance timer
countdown sequence ,the
sauna room door has been
opened , the timing stopped
and will not restart again
until it is reset.
Reset counter down timer
Wait LED is on red
Sauna heater is in
timer mode
If you want heat press the Model button
to change to A model (heating Mode)
Temperature windows
display --L
℃
(or
)or ℉ --H ( ℃ or ℉ )
1. Temp sensor isn ’ t
connected or cable is
broken
2. The temperature is
lower than 0 ℃ (or
32 ℉ ),
The temperature is
higher than 115
℃
(or
239
℉
)
1. – L
℃
(or
℉
) means temperature
sensor hasn ’ t connected or the
temperature is lower than 0
℃
(or
32
℉
), check the connection, cable or
change sensor
2. – H
℃
(or
℉
) means there is a short
circuit in the temperature sensor or the
temperature is higher than 115 ℃ (or
239
℉
) check the connection, cable or
change sensor
3. Change controller
Chapter Six Maintenance
We recommend that you inspect the sauna heater on a regular basis for any signs of deterioration of the
condition, pay particular attention to both the fastenings, the condition of the wiring and the electrical elements.
Note if the rocks have started to crumble this can cause the elements to overheat and they should be changed
for new rocks. We recommend commercial operators to change the rocks at least once very 12 months.
Chapter Seven: Warranty & After Sales
All OCS Series Sauna Heaters are guaranteed for 1 year from the date of purchase against faulty materials or
workmanship. The guarantee excludes consumable items such as the electrical elements and faults arising
from misuse or abuse of the appliance.