
AQUA Sauna Heater
E002B-23-10-12 11
Fig 8
Remarks: control box output to sauna heater can
’
t be bridged.
4.multi sauna heater linking function
Fig 9
3. Installation for controller
Ideally the control panel should be installed at a height of approximately 1200mm for ease of use.
Installation method: drill a
∮
40mm hole on wall for the wires. You can mount the panel by either
drilling two holes 118mm apart for the screws or the easier method removed the plastic cover using a
flat headed screw driver to carefully lever the cover off, then use the holes to mark your drill holes,
remove panel and drill, replace panel screw into place.
118mm
Содержание ZL 10.5
Страница 1: ......