Aqua ZL 10.5, Руководство пользователя, Страница: 13 / 19

AQUA Sauna Heater
E002B-23-10-12 13
below – according to the position of the heater within the cabin it may need to be guarded on 2 or 3 sides.
Fix the guard in place around the heater by drilling screwing accordingly.
(Fig 13)
Note:It is important that the top rail of the guard is set at least 30 mm below the rim of the
heater such that it does not receive heat radiation directly from the heater rocks.
8. Sauna stones
Do not use the heater without stone, otherwise it may cause a fire.
Only use
Peridotite rock sauna rocks
.
These can be supplied from the dealer where you purchased the heater. Do not use ordinary stones, which
may emit harmful substances, easily break and do not possess good heating capacity. Wash the stones to clear
the dust before putting them into the heater. Stones of unspecified sizes should not be used.
Put the larger stones at the bottom of stove compartment and the smaller ones on top. Do not pile them
tightly so that air can flow freely. NOTE: Too tightly placed stones decrease working time of the heater element,
the stones should plainly cover the heater element (refer to Pile stones fig8 ). The diameter of stone is about
3-8cm.
Rearrange the stones in the heater at least once a year or twice if it is in frequent use (maximum 500 hrs).
To decide the correct volume of stones in heater, refer to table 1 (Technical parameter ) provided.
(Fig 14)