Aqua ZL 10.5, Руководство пользователя, Страница: 16 / 19

AQUA Sauna Heater
16 E002B-23-10-12
function will start (A Model). This is explained more at the bottom of this page.
Chart 9
Default Temp Temperature adjust scope
Model Default model
℃ ℉ ℃ ℉
A 75 167 50~110 122~230
Default time Time adjust scope
Working time Waiting Work time Waiting time
2 hours 4 hours 10 minutes~8 hours 0~12 hours
The time adjustment difference for every
press
The temperature adjustment difference
for every press
OC-SB
10minutes
1
℃
/2
℉
2. Setting time and temperature:
•
The default settings for temperature are: 75 ℃ /167 ℉ . For preset operation time: 2 hours. These can
be adjusted easily, if the electricity supply is lost the controller will return to default settings.
•
When the sauna is turned on the time settings will work under A model (A model LED is on), the time
window will display the last time that was set. Press ” ” key the time display window will flash. press
“ ” or “ ” to adjust the time, every press the time will increase or reduce 10 minutes. once the
desired setting is reached press “ ” the window will stop flashing. You can adjust from the time
from 10 minutes to 8 hours. Note the controller has a memory function, if the power supply is not cut
off the next time you turn on sauna heater the time you selected will be the default time.
•
To set your heater to come on at a certain time (for example: if you plan to watch a film and want the
sauna to start heating up half way through so its ready at the end of the film) you can use the B model
setting which can be set if you press the ” and the time window will display
4:00
, now Press ” ”
key the time display window will flash. press “ ” or “ ” to adjust the time, every press the time will
increase or reduce 10 minutes. once the desired setting is reached press “ ” the window will stop
flashing., when it reaches “ 0 ” it will switch over to A Model and the heater will turn on. (Remember to set
the time you want the heater on for on A Model before setting B Model)
•
For quick time adjustment: hold the “ ” or “ ” and it will count continuously up or down, when
it reaches the time you want release and it will stop.
•
Temperature: switch button you can switch between centigrade and Fahrenheit.