APV PS 300 M1 D, Руководство по эксплуатации

Страница: 35 / 60

35
5.7 Checking the ease of motion of the seeding shaft
Purpose
Each time the seeding shaft is installed or replaced, it must be checked for ease of
motion. This check is performed by a hearing test.
Requirements
The following requirement must be fulfilled for this work step:
•
The seed tank is empty, see
Emptying the seed tank
On page 42 for more
information.
Required components, tools and materials
For this work step, the following components, tools and materials are required:

None
Procedure
This is how to check the ease of motion of the seeding shaft:
Step Description
1 Switch on the seed drill.
2 Perform the hearing test.
3 If the sound of the running seeding shaft is noticeably loud or irregular,
contact the maintenance and repair service, see
Contact service
On page 6
for more information.
5.8 Setting the brush pressure
Purpose
The brush pressure on the seeding shaft is regulated using the brush adjustment lever.
Requirements
The following requirement must be fulfilled for this work step:
•
None
Required components, tools and materials
For this work step, you need the following components, tools and materials:
•
None