APV PS 300 M1 D, Руководство по эксплуатации

Страница: 41 / 60

41
In this section, you will find information for eliminating faults that may occur during
operation.
6.1 Fault overview
Problem Cause Remedy
The seeding shaft does not rotate
when the drive shaft of the
gearbox motor is rotating •
The fitted key fell
out of the drive shaft
•
Stick on a new fitted
key
The seed hoses get clogged •
Fan speed is too
low
•
Check the fan
speed and increase
if necessary
You can find more information on other faults in the operating manuals for the
respective control boxes.
If the problem could not be fixed, please contact the manufacturer. You can find
information for this under
Contact Service
On page 6.
In this section, you will learn how to clean and maintain the seed drill, and what to do in
case of damage or failure of the implement.
7.1 Disconnecting the seed drill from the power
supply
Purpose
Setup and maintenance work often require that the seed drill is disconnected from the
power supply.
Requirements
The following requirements must be fulfilled for this work step:
•
None
Required components, tools and materials
For this work step, the following components, tools and materials are required:
•
None
6 Faults
7 Cleaning, maintenance, and repairs