APV PS 300 M1 D, Руководство по эксплуатации

Страница: 37 / 60

37
Overview
No. Designation
1 Air regulation lever
2 Setting scale
Procedure
This is how to set the air control flaps:
Step Description
1 Pull the air regulation lever (1) out of the setting scale.
2 Move the air regulation lever to the desired position and engage it in the
appropriate notch of the setting scale.
The following orientation rules apply here:
•
Increase the air current in the + direction.
The normal setting is completely open.
•
Reduce the air current in the - direction.
For coarse seed types, to have a greater distance from the seeding shaft
and therefore avoid damage to the seeding shaft; if short, descending
hoses are used on one side and more air is required on the other side.
•
If less air is required for both seeding shafts, reduce the fan speed on the
control box.
5.10 Setting the fill level sensor
Purpose
The setting of the fill level sensor determines the minimum fill level and adjusts the
sensor for the seed type.
Requirements
The following requirement must be fulfilled for this work step:
•
The seed tank is empty, see
Emptying the seed tank
On page 42 for more
information.