APS 901-0101, Руководство пользователя

Страница: 14 / 16

14
RMC
SNMP:
This sets the parameters to enable the RMC to send
SNMP Traps. The settings are normally acquired
from the network administrator. If this function is not
used leave
"Trap receiver IP” blank (see also
SNMP section on next page).
Restore factory settings:
Click to restore the Factory settings, or cancel to
return to the main page.
GSM Modem:
In order for the RMC to send
notifications by text messages a
GSM modem needs to be
connected to the RS232 Interface
(GSM modem is an optional
accessory). The RMC confirms
the connection of a modem on its
main page with
“GSM-modem
START OK” in the event list and
with “GSM OK” on the left in the
menu section.
Important :
The modem should only be turn
on when it is connected to the
serial port of the RMC and a SIM
card is inserted. The PIN code
request should also be disabled
on the SIM card.