APS 901-0101, Руководство пользователя, Страница: 13 / 16

13
RMC
Receiver / Remote alarm:
Up to 5 recipients can be configured to be notified by
email or text message when an alarm is raised. For
notification by email enter the email address of the
recipient. For notification by text message enter the
recipients cell phone number starting with
“+” and
followed by the country code e.g.: +41794801776
(GSM modem is an optional accessory).
One of the 8 digital inputs can also be configured for
an external acknowledgement. Enter the channel
number under:
“Input external acknowledge” .
Passwords & Lock codes:
These controls access to all web pages. The factory
settings shown should be changed. The
“Lock code
(temporary)” controls the code to be entered on the
keypad to open the door. The code must be 4 to 8
digits.
“Valid until hour” defines when the
temporary lock code shall be removed. Open time in
seconds defines how many seconds the door relay
will be activated.
Network:
All basic network settings are defined here. The first
five settings are normally acquired from the network
administrator. The RMC must have a unique IP
address to identify itself on the network. The Subnet
mask tells the RMC if outgoing traffic should go via
the gateway/router or if the receiver is on the same
segment.