manualshive.com logo in svg

APRILIA RSV4 1100 Factory 2021, Руководство пользователя

Поделиться
Скачать
APRILIA RSV4 1100 Factory 2021 Скачать руководство пользователя страница 373

•

upper collar 0.49 mm + 1.5 mm (0.30 in / + 0.93 in)

Assembling

•

Fit the upper collar.

•

Partially tighten the dowel in the rela-

tive threaded hole, so that it protrudes

by no more than 2 or 3 mm into the

conical surface.

•

Fit the bushing in its seat, ensuring that

the seal (in the groove in the bushing)

remains in place.

•

Press the bushing into place with a rub-

ber mallet.

•

Tighten the dowel to the specified tor-

que.

•

Repeat the procedure for the lower

bushing.

•

Fit the steering assembly and restore

the correct steering bearing free play.

See also

Adjusting play

Rear

RSV4 1100 Factory

Suspensions

SUSP - 373

Содержание RSV4 1100 Factory 2021





















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды