manualshive.com logo in svg

APRILIA RSV4 1100 Factory 2021, Руководство пользователя

Поделиться
Скачать
APRILIA RSV4 1100 Factory 2021 Скачать руководство пользователя страница 354

•

Drain the oil into a container of suitable

capacity to collect fluids.

DO NOT DISPOSE OF OIL IN THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.

Disassembling the fork

RSV4 1100 FACTORY (OHLINS - ASC)

NOTE

THE FOLLOWING OPERATIONS REFER TO THE OHLINS ELECTRONIC FORKS.

•

Remove the pre-loading tube.

•

Remove the wheel holder shaft (1) and

the sleeve (2).

•

Clamp the sleeve in a vice and, by lev-

ering it alternately at various points,

remove the anti-dust seal (3) from the

sleeve (2).

Suspensions

RSV4 1100 Factory

SUSP - 354

Содержание RSV4 1100 Factory 2021





















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды