APRILIA PEGASO 650 IE - 2004 Скачать руководство пользователя

Страница: 49 / 96

use and maintenance

Pegaso 650 I.E.

POSITIONING THE VEHICLE ON
THE STAND

SIDE STAND

To place the vehicle on the side stand
while seated astride the vehicle, see p. 37
(GETTING ON AND OFF THE VEHICLE).

If any manoeuvre (for example, moving the
vehicle) required the lifting of the stand, to
place the vehicle on the stand again,
proceed as follows:

WARNING

Make sure that the parking surface is
free from obstacles, firm and flat.

Choose a suitable parking area, see p.
48 (PARKING).

Grasp the left grip (1) and the handle (2).

Press the side stand with your right foot
and extend it completely (3).

Incline the vehicle until the stand rests
on the ground.

Steer the handlebar completely
leftwards.

WARNING

Make sure that the vehicle is stable.

C E N T R E S T A N D

( s u p p l i e d a s

standard equipment in the countries
where required)

WARNING

It is forbidden to position the vehicle on
the centre stand while seated astride
the vehicle in riding position.

WARNING

Make sure that the parking surface is
free from obstacles, firm and flat.

Choose a suitable parking area, see p.
48 (PARKING).

Grasp the left grip (1) and the handle (2).

CAUTION

Th e l o we ri ng of t h e s id e s t a n d i s
suggested, for safety reasons, in order
to prevent the vehicle from falling down
or overturning in case of unbalance.

NOTE

Do not let the side stand touch

the ground. Keep the vehicle in vertical
position.

Press the side stand with your right foot
and extend it completely (3).

Push down the lever (4) (

Pos.A

) of the

centre stand and make it rest on the
ground.

Содержание PEGASO 650 IE - 2004

































































































Результаты поиска

Содержание PEGASO 650 IE - 2004

Отзывы:

Похожие инструкции для PEGASO 650 IE - 2004

Бренды по названию

Популярные бренды

APRILIA PEGASO 650 IE - 2004, Руководство пользователя

Результаты поиска

Содержание PEGASO 650 IE - 2004

Отзывы:

Похожие инструкции для PEGASO 650 IE - 2004

Бренды по названию

Популярные бренды