background image

21

use and maintenance   

Pegaso 650 I.E.

SIDE BAGS 

J

 (supplied as 

standard equipment in the 
countries where required)

Thanks to the use of the side bags it is
possible to transport clothes or other
objects even in bad weather, so that they
are protected and do not constitute a
hindrance or a risk for the rider.

NOTE 

If the side bags are not installed

on the vehicle, before using them it is
necessary  to install the appropriate
supports, see p. 66 [INSTALLING THE
SIDE BAG SUPPORTS 

J

 (supplied as

standard equipment in the countries where
required)].

Clean and lubricate the coupling lock on
the bag every 6000 km (3750 mi) or 12
months.

NOTE 

The following information refers

to one unit only, but is valid for both.

To open the side bag, proceed as
follows:

u

Position the vehicle on the stand, see p.
49 (POSITIONING THE VEHICLE ON
THE STAND).

u

Introduce the key (1) in the lock.

u

Turn the key (1) anticlockwise.

u

Extract the key (1) and insert it in the
other lock.

u

Turn the key (1) anticlockwise.

u

Lift the two parts of the lock (2).

u

Open the case (3).

Two keys are supplied together with the
vehicle (one spare key).

NOTE 

Do not keep the spare key on the

vehicle.

WARNING

If it is necessary to transport more than
one object, distribute the load uniformly
on the side bags.

Secure the luggage by means of the
appropriate elastic belts, in such a way
as to avoid dangerous movements of
the same during the trip. 
It is not advisable to use the vehicle
with only one side bag installed.

Do not load the side bags excessively.

Maximum allowed weight: 5 kg (for each
bag).

Содержание PEGASO 650 IE - 2004

































































































Отзывы: