manualshive.com logo in svg

APRILIA PEGASO 650 IE - 2004, Руководство пользователя

Поделиться
Скачать
APRILIA PEGASO 650 IE - 2004 Скачать руководство пользователя страница 58

58

use and maintenance   

Pegaso 650 I.E.

REAR WHEEL

CAUTION

The disassembly and reassembly of the
rear wheel may be difficult for unskilled
operators. 

If necessary, contact your 

aprilia

Official Dealer. 

If you want to perform these operations
p e r s o n a l l y ,   k e e p  t o   t h e  f o l l o w i n g
instructions.

Carefully read p. 51 (MAINTENANCE).

WARNING

Before carrying out the fo llowing
operations, let the engine and the
silencer cool down until they reach
room temperature, in order to avoid
burns.

WARNING

Riding with damaged rims may be
dangerous for the rider, other persons
and the vehicle.

Check the conditions of the wheel rim
and change it if it is damaged.

DISASSEMBLY

u

Position the vehicle on the appropriate
r e a r   s u p p o r t   s t a n d ,   s e e   p .   6 1
(POSITIONING THE VEHICLE ON THE
REAR SUPPORT STAND 

J

).

u

Put a support (1) under the tyre, in such
a way as to keep the wheel in its position
after loosening it.

u

Lock the rotation of the wheel pin (2) with
the appropriate key.

u

Unscrew and remove the nut (3) and
retrieve the washer (4).

Wheel nut (3) driving torque: 100 Nm (10
kgm).

NOTE

To facilitate the extraction of the

wheel pin, slightly raise the wheel.

u

Withdraw the wheel pin (2) from the left
side and take the washer (5).

NOTE

Lower the drive chain (6) outside

the crown gear (7).

u

Make the wheel advance and release the
drive chain (6) from the crown gear (7).

u

Withdraw the wheel from the rear fork
from behind, carefully withdrawing the
disc from the brake caliper.

Содержание PEGASO 650 IE - 2004

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды