manualshive.com logo in svg

APRILIA PEGASO 650 IE - 2004, Руководство пользователя

Поделиться
Скачать
APRILIA PEGASO 650 IE - 2004 Скачать руководство пользователя страница 59

59

use and maintenance   

Pegaso 650 I.E.

CAUTION

Do not operate the rear brake lever after
removing the wheel, since the pins may
go out of their seats and cause brake
fluid leakages. In this case consult your

aprilia

 Official Dealer, who will carry

out the proper maintenance operation.

NOTE

The support plate (8) complete

with brake caliper (9) remains positioned
on the left side of the rear fork.

Proceed with care. If the final drive unit
(10) is installed on the flexible coupling
holder (11), do not overturn or rotate the
rear wheel in horizontal position (on the
rear sprocket side), since the final drive
unit would come off and fall down, with the
risk of damaging the rear sprocket (7).

NOTE

The removal of the final drive unit

isn’t necessary if the wheel is in the normal
running position (vertical) or in horizontal
position with the rear sprocket facing
upwards and  in both c ases  sec ur ed
against overturning.

NOTE

Do not unscrew the six nuts (12).

T h e   w h o l e   f i n a l   d r i v e   u n i t   m u s t   b e
withdrawn from the flexible coupling
holder.

u

Withdraw the final transmission unit (10),
keeping it parallel to the wheel axis.

u

Remove the four flexible couplings (13)
from the flexible coupling holder (11).

NOTE

Check the conditions of the four

flexible couplings (13); if they are damaged
or excessively worn, change them, see p.
52 (REGULAR SERVICE INTERVALS
CHART).

REASSEMBLY

NOTE

Insert the final transmission unit,

parallel to the wheel axis, introducing the
drive pins in the relevant seats, between a
flexible coupling and the other.

u

Position the four flexible couplings (13) in
the relevant seats in the flexible coupling
holder (11).

u

Insert the final drive unit in the flexible
coupling holder (11).

Содержание PEGASO 650 IE - 2004

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды