16
use and maintenance
Pegaso 650 I.E.
MAIN INDEPENDENT CONTROLS
CONTROLS ON THE LEFT PART OF
THE HANDLEBAR
NOTE
The electrical parts work only
when the ignition switch is in position “
”.
1) HORN PUSH BUTTON (
)
The horn is activated when the push
button is pressed.
2) DIRECTION INDICATOR SWITCH (
)
To indicate the turn to the left, move the
switch to the left; to indicate the turn to
the right, move the switch to the right.
To turn off the direction indicator, press
the switch.
3) DIMMER SWITCH (
-
)
When it is in position “
” the parking
lights, the dashboard light and the low
beam are always on.
When it is in position “
”, the high
beam comes on.
4) HIGH BEAM SIGNALLING PUSH
BUTTON (
)
It makes it possible to use the high
beam for signalling to forthcoming
vehicles while overtaking and in case of
peril and/or emergency.
Press the push button to operate the
high beam blinking
NOTE
To disconnect the high beam
blinking, release the push button.
5) COLD START LEVER (
)
The starter for the cold start of the
engine is operated by rotating the lever
“
” downwards.
To disconnect the starter, move the
lever “
” to its initial position.
CONTROLS ON THE RIGHT PART
OF THE HANDLEBAR
NOTE
The electrical parts work only
when the ignition switch is in position “
”.
6) ENGINE STOP SWITCH (
-
)
WARNING
Do not operate the engine stop switch
“
-
” in running conditions.
This is a safety or emergency switch.
With the switch pressed in position “
”,
it is possible to start the engine; when
the switch is pressed to position “
”,
the engine stops.
CAUTION
Wit h s to ppe d e ng in e a nd ign it i on
switch in position “
”, the battery may
discharge.
When the vehicle has come to rest, after
stopping the engine, move the ignition
switch to position “
”.
7) START PUSH BUTTON (
)
When the start push button “
” is
pressed, the starter makes the engine
r u n . F o r t h e s t a r t i n g , s e e p . 4 1
(STARTING).
