6
Connecting with the USB Y-Cable
If none of the Aegis Padlock LEDs power on a single USB connection, use
the included USB Y-cable.
1.
Attach the Aegis Padlock’s integrated USB cable to the female connector
of the USB Y-cable.
2.
Connect the two male USB connectors to two available USB ports on
your computer.
3.
At least one of the Aegis Padlock LEDs should turn on, indicating that the
Aegis Padlock is powered.
When you first plug in the SSD Padlock, the unit will do a self-test to verify all security
components are working properly. The LEDs will go through 3 test stages
RED
,
GREEN
, and
BLUE
. This will be followed by three
GREEN
flashes on a successful
test. Any test failure will leave the unit in an interoperable state with the
RED
LED
flashing.
