MVR-64
Samplerate (only required for
DA
or
INT
):
44100,48000,64000,88200,96000,128000,176400,192000
SMUX (only required for
AD,MO,MC,MT or WCLK
):
1,2,4
asrc [disable|<in> <out> <clksrc> [<srate>|<smux>]]
disable
Turn off ASRC
<in>,<out>
Interfaces which should run asynchronously.
Values:
AD,MO,MC,MT,AE,DA,EX,MO+MC,MO+MT,MC+MT,AE+MT,NONE
If
NONE
is specified, the ASRC is turned off for the respective direction. If both
<in>
and
<out>
are set to
NONE
the ASRC is turned off.
<clksrc>
Interface where the ASRC takes its clock from
<srate>
Samplerate (for
DA,INT
), values see 'clock' command
<smux>
SMUX (for
AD,MO,MC,MT,WCLK
):
1,2,4
6.3.
Dante Clock
The Dante network itself needs one device which acts as "Network clock master"
(not to be confused with the system clock master, which may also be a different
device!)
The selection of the network clock master can be done in the Dante Controller
software, and must be done depending on the multiverter's main clock source:
multiverter clock source
(set on multiverter)
Dante network clock master
(set in Dante controller software)
Dante module
☼
DA
any Dante node (except Dante Virtual Soundcard)
all other sources
only multiverter possible
Table 3: Dante clocking modes
29
