MVR-64
6.2.
Clock source selection
▶ Front panel,
Front panel
To set the
main
clock source:
Push the
Set
button in the “Clock” menu.
Move the yellow blinking cursor to the desired clock source.
Push the encoder or press the
Set
button to select the interface, or press
⮌
Back
to cancel.
Depending on the selection, you will be asked to provide additional information:
When the clock source is set to internal
☼
INT
, you will be asked for the
sample frequency where the internal clock should run at. Choose one from the
☼
32kHz
to
☼
192kHz
, or press
⮌
Back
to return to the clock source
selection. NOTE: Not all sample rates (especially the 32/64/128kHz modes) are
available on all interfaces).
When MADI optical
☼
MO
, MADI coaxial
☼
MC
, MADI-TP
☼
MT
or BNC
wordclock
☼
WCLK
is chosen, you need to set whether the multiverter should
run in x1 (32/44.1/48kHz), in x2 (64/88.2/96kHz) or in x4 (128/176.4/192kHz).
Choose the desired mode and push the encoder to confirm, or press return to
the clock source selection.
Note: Regardless of the selection, the multiverter will always run in x2 mode
when MADI 96k frames are received.
27
