Apollo RoadRunner HD, Руководство пользователя и инструкция по эксплуатации

Страница: 35 / 45

RoadRunner HD™ | High Definition Mobile Recorder
29
Audio detection can be turned On or Off for each camera. This feature sends alerts when audio detection is below the
set sensitivity level. This notification indicates a possible loss of audio.
Selecting the box under the
Sensitivity
heading allows adjustment of the Recorder’s sensitivity to audio detection.
There are five settings with
1
being the least sensitive and
5
being the most sensitive.
Selecting the box under the Activation Time heading allows setting the duration before the Recorder reports an audio
detection. The Recorder will not consider any audio detection to be an event if the detected audio is less than the
Activation Time.
Select the box under Actions . The Recorder can be set to react to audio detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out and Alarm LED, and/or notify a number of
different devices.
Select the box beside
Ignoring Interval
. A list of intervals ranging from 1 to 5 seconds or
Never
appears. The Recorder
will not log and notify audio detection events occurring during the preset interval range.
NOTE: The record action for audio detection events is not affected by the Audio Detection Ignoring function.
Selecting Use Ignoring Time toggles between On and Off. When set to On, the Recorder ignores audio detection
events occurring during the preset period. Selecting Time Setup allows set up of event ignoring time.
Devices Setup
Alarm-Out
PATH: Devices menu > Alarm-Out
Each alarm output can be given its own title by selecting the box under the Title heading. Enter the title of each alarm
output.
Selecting the box under the
Type
heading allows to set the alarm output for NO or NC (normally open or normally
closed).
Selecting the box beside
Dwell Time
allows setting the dwell time of the alarm output. Dwell times range from 5
seconds to 15 minutes.