Apollo RoadRunner HD, Руководство пользователя и инструкция по эксплуатации

Страница: 33 / 45

RoadRunner HD™ | High Definition Mobile Recorder
27
Select the box under
Actions
. The Recorder can be set to react to motion detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out and Alarm LED, and/or notify a number of
different devices.
Control excessive event logging and remote notification of motion detected after the motion dwell time by adjusting
the motion ignoring dwell interval. Select the box beside
Ignoring Interval
. A list of intervals ranging from 1 to 5
seconds or
Never
appears. The Recorder will not log and notify motion events occurred during the preset interval range.
NOTE: The record action for motion events is not affected by the Motion Ignoring function.
Selecting
Daytime Setup
allows set up of the Daytime range. Use the Up and Down arrow buttons to set the
Daytime
range. The Recorder will consider the remaining time range as Nighttime.
TripZone
Video tripzone detection can be turned On or Off for each camera. Tripzone defines a boundary for motion detection
(into or out of). Motion across the boundary will trigger an event. Motion inside or outside the area will not trigger
an event.
Selecting the box under
Sensitivity
heading allows adjustment of the Recorder’s sensitivity to tripzone for Daytime
and Nighttime independently. There are five settings with
1
being the least sensitive and
5
being the most sensitive.
Selecting the box under
Zone
heading displays the zone setup screen. Set up tripzone detection zones by selecting or
clearing blocks. Select the tool to use and set tripzone detection zones by dragging the mouse.

(Select) or (Clear): Click to select or clear a block for tripzone detection.

or (One or All blocks): Click to select or clear one or all blocks at a time.

(Area): Click to select or clear several blocks of an area.

Trip Direction
: Select the direction of movement considered as an event.
Selecting In considers a movement as an event when motion into the selected
area is detected, and selecting Out when motion from the area is detected.

OK : Click to accept changes and close Zone setup.

Cancel : Click to exit Zone setup without saving changes.
Select the box under
Actions
. The Recorder can be set to react to tripzone detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out and Alarm LED, and/or notify a number of
different devices.
Select the box beside Ignoring Interval . A list of intervals ranging from 1 to 5 seconds or Never appears. The Recorder
will not log and notify tripzone events occurred during the preset interval range.