Apollo RoadRunner HD, Руководство пользователя и инструкция по эксплуатации

Страница: 25 / 45

RoadRunner HD™ | High Definition Mobile Recorder
19
Configure the camera’s recording and remote compression method, resolution, picture quality, transfer speed, and ips
speed settings.
Select the box beside
Camera Channel
and select the camera number to configure a unique video profile. Selecting
the
Copy to Camera
box applies the video profile settings of the camera selected under Camera Channel to the
selected camera.
Select the box under
Encode
. The compression method supports H.264.
Select the box under Resolution and select a resolution supported by the camera. Maximum available resolution is
chosen automatically based on the selected video profile.
Select the box under
Quality
and select from Very High, High, Standard, or Low. Assign different Quality settings to
different cameras.
Select the box under
Bitrate
and select between CBR (constant bitrate) and VBR (variable bitrate). Transmitted data
size is fixed with CBR but varies depending on the amount of movement in the images with VBR.
Select the box under ips (images per second) and select between 1 and 30. Maximum ips available is determined
automatically based on the selected video profile.
Selecting
Use Dynamic Live Stream
will automatically transmits the Live (Single, 2x2, 3x3 and 4x4 screen) stream,
depending on the remote program's live screen layout.
Audio
PATH: Camera menu > Audio
Selecting the box under
Audio allows configuration of audio settings for each channel.
Select the box beside Audio Codec and select the audio codec between G.711
u-Law and G.726.
Select
Audio In
to enable or disable audio for that camera.
Use the
Volume
slider to adjust the volume.
Selecting the box under
Audio In Source
allows you to select the audio input source between
Direct
(Camera) and
MIC 1
or
MIC 2
(MIC 1 or MIC 2 port on the rear panel of the Recorder).