Apollo MRH Series Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 74

Apollo MRH Series Скачать руководство пользователя страница 56

Operating Manual

48

Display Menu

In the Live Monitoring mode or Search mode, moving the mouse pointer to the left edge of the screen displays the following
Display menu.

Full Screen

PIP

2x2

1P5
1P7
3x3

4x4

Previous Group
Next Group

OSD

Figure 61 — Display menu.

Full Screen

Selecting (Full Screen) in the Display menu and choosing the camera number button displays the selected camera
full screen. It is the same as clicking the mouse button on a camera image when in one of the multiview formats (i.e.,
2x2, 1P5, 1P7, 3x3 or 4x4). Clicking the mouse left button on the screen again returns to the previous display mode.

PIP, 2x2, 1P5, 1P7, 3x3, 4x4

Selecting , ,

,

,

or (PIP, 2x2, 1P5, 1P7, 3x3 or 4x4) in the Display menu displays

the cameras in the

selected multiview screen mode (PIP, 2x2, 1P5, 1P7, 3x3 or 4x4). Selecting each display mode is the same as scrolling
the mouse wheel up and down when in one of the multiview formats (i.e., 2x2, 1P5, 1P7, 3x3 or 4x4).

NOTE: The PIP, 1P5 and 1P7 display modes will not be supported in the search mode.

In the 1P5 or 1P7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the mouse right button to display the Camera Menu.
Selecting Go To Main swaps the selected channel with the main channel. This function is supported
only in the 1P5 and 1P7 display modes and can be activated from any of channel screens except the
main channel screen.

You can change the location of the PIP (Picture-in-Picture) counterclockwise or clockwise, and change
its size by using the mouse. Select the PIP and then click the mouse right button to display the following
menu. Select the options you want.

You can also change the location of the PIP by clicking the mouse

left button on the PIP window and dragging it to where you want it located, and change the size of the
PIP by clicking the mouse left button at the corner of the PIP window and dragging it until it is the
desired size.

Previous Group, Next Group

Selecting

or

(Previous Group or Next Group) in the Display menu moves to the previous or next page.

OSD

Selecting

(OSD) in the Display menu toggles OSD On and Off.

«
...
54
55
56
57
58
...
»

Содержание MRH Series











































































Отзывы:

Нет отзывов