Apollo MRH Series, Руководство пользователя и инструкция по эксплуатации, Страница: 37 / 74

Mobile Digital Video Recorder
29
PATH: Devices menu > Display > Touch tab
See
Appendix – Use of Touch Screen Monitor
.
Remote Control
PATH: Devices menu > Remote Control
Select
Remote Control
in the Devices menu, and the
Remote Control
setup screen allows you to select a port and
make correct settings for a remote control.
Select the box beside
Port
and select from None, RS232 1,
RS232 2 and RS485. If the RS232 ports and RS485 port are
in use for PTZ control, networking, text input or GPS, the
remote control cannot be configured.
Select
Setup…
and select the correct Baud Rate, Parity, Data
Bits and Stop Bits for the device you are connecting to the
DVR.
Select the box beside
Remote Control Product
and select
the device from the list.
Figure 35 — Remote Control setup screen.
GPS
PATH: Devices menu > GPS
Figure 36 — GPS setup screen.
Select the box beside
Port
and select from None, RS232 1,
RS232 2, RS485 and LAN (1 ~ 16). If the RS232 ports and
RS485 port are in use for PTZ control, networking, text input
or remote control, the GPS cannot be configured.
Select
Setup…
and select the correct Baud Rate, Parity, Data
Bits and Stop Bits for the device you are connecting to the
DVR. Use the GPS
manufacturer’s recommended settings
when configuring the RS232 or RS485 ports.
Selecting
Enable Recording
toggles On and Off. When set
to On, the DVR will record images with GPS information.
Selecting
Use GPS Time Sync
toggles On and Off. When
set to On, the DVR will synchronize the time to the GPS
satellite in the interval of 1 hour.
Select the box beside
Speed Unit
and select the unit of measure for the display speed between
km/h
and
mph
when
displaying GPS speed on the screen.
Select the box beside
Interval
, and a list of intervals appears. The DVR will log and notify GPS bad system events if
the GPS receiver does not receive any satellite data during the preset interval range.
Selecting
Save
displays the GPS information box on the screen while the GPS receiver receives
satellite data. You can change the position of GPS information box by clicking the bar on the top
of the box and dragging it to where you want it located on the screen.