Apollo MRH Series, Руководство пользователя и инструкция по эксплуатации, Страница: 43 / 74

Mobile Digital Video Recorder
35
Select the desired box under the
PTZ
heading, and a list of PTZ presets appear. Select the preset position for each PTZ
camera, where you want PTZ cameras to move to whenever the DVR detects an input on the associated alarm input.
Motion Detection
PATH: Event menu > Motion Detection > Settings tab
Your DVR has built-in video motion detection. Video motion
detection can be turned On or Off for each camera.
Figure 46 — Motion Detection Settings screen.
Selecting the box under the
Sensitivity
heading allows you to adjust the DVR’s
sensitivity to motion for Daytime and Nighttime independently. There are five settings
with
1
being the least sensitive and
5
being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Select the box under the
Zone
heading, and the
Motion Detection Zone
screen displays.
The
Motion Detection Zone
screen is laid over the video for the selected
camera. You can set up motion detection zones by selecting or clearing blocks.
NOTE: Blocks can be selected by holding down the mouse button and
dragging the pointer to where you want to end the zone, and
individual blocks are selected or cleared by clicking the mouse
button.
Click the mouse right button to display the menu screen. The menu on the setup screen has the following functions:
Select
— Activates selected blocks to detect motion.
Clear
— Deactivates selected blocks so that they will not detect motion.
Reverse
— Activates inactive selected blocks and deactivates active selected blocks.
Select All
— Activates all blocks to detect motion.
Clear All
— Deactivates all blocks so that they will not detect motion.
Reverse All
— Activates inactive blocks and deactivates active blocks.
OK
— Accepts changes and closes Zone setup.
Cancel
— Exits Zone setup without saving changes.
You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Selecting the box under the
Min. Blocks
heading allows
you to adjust the minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because fewer detection
blocks must be activated.
Turning
Zone View
On will allow you to observe how the DVR is reacting to motion. When in the motion viewing
mode, the detection zone of video will be displayed. Any detected motion within the zone will be displayed in red.