Apollo MRH Series, Руководство пользователя и инструкция по эксплуатации, Страница: 42 / 74

Operating Manual
34
Alarm-In
PATH: Event menu > Alarm-In > Settings tab
Figure 44 — Alarm-In Settings screen.
The alarm terminal strip on the back of the DVR has inputs
associated with each alarm. You can set up each input on the
Alarm-In
screen. You can turn each input On or Off by
selecting the alarm number.
Each input can be given a title. Select the desired Title box, and
a virtual keyboard appears allowing you to enter a title name.
Each input can be set as
NO
(normally open) or
NC
(normally
closed).
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm input connectors. Select
the box beside
Panic Record
, and a list of Alarm Inputs appears, and you can select which alarm input you want associated
with panic recording. The DVR will continue panic recording until an input on the selected alarm input is released or
you stop the panic recording manually.
PATH: Event menu > Alarm-In > Actions tab
You can set the actions the DVR will take whenever it senses
an input on one of its alarm input connectors.
Select the desired box under the
Record
heading, and a list
of cameras appears. Select the cameras that you want the DVR
to record whenever it detects an input on the associated alarm
input.
NOTE: For the Record action, the camera you select
should be set to the Event or Time & Event
recording mode in the Record Schedule setup
screen.
Figure 45 — Alarm-In Actions screen.
Select the desired box under the
Alarm-Out
heading, and a list of Alarm Outputs and Beep appear. Select the Alarm
Output connectors that you would like to activate whenever the DVR detects an input on the associated alarm input.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Select the desired box under the
Notify
heading, and the
Alarm-In Notify
menu appears.
You can toggle the entire list On and Off by selecting
Notification
. You can toggle
the individual items On and Off by selecting that item. Select
OK
to accept your
changes.
NOTE: For the Notify action, the notify item you select should be enabled in
the Notification setup screen and the DVR should be registered in the
RAS (Remote Administration System).