Apollo MRH Series, Руководство пользователя и инструкция по эксплуатации, Страница: 22 / 74

Operating Manual
14
Figure 9 — Date/Time setup screen.
Select the first box beside
Date
and the individual sections
of the date will highlight. Use the Up and Down arrows to
change the number.
Select the Format box beside
Date
and select from the three
available date formats to save your selected format.
Select the first box beside
Time
and the individual sections of
the time will highlight. Use the Up and Down arrows to change
the number.
Select the Format box beside
Time
and select from the three
available time formats to save your selected format.
NOTE: The clock will not start running until you have selected Save.
Select the box beside
Time Zone
and select your time zone from the list.
NOTE: The Time Zone can also be selected on the map below by pressing the Left and Right buttons or scrolling
the mouse wheel up and down.
Selecting
Use Daylight Saving Time
toggles between
On
and
Off
.
PATH: System menu > Date/Time > Holiday tab
You can set up holidays by selecting
+
. The current date
appears.
Select the month and day and change them by using the Up
and Down arrows. Dates can be deleted by selecting the
beside the date.
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year’s
holiday has passed.
Figure 10 — Holiday setup screen.
PATH: System menu > Date/Time > Time Sync. tab
You can set up time synchronization between the DVR and standard time servers that are available in most time zones
and countries, or between the DVR and another DVR.
Figure 11 — Time Sync. screen.
Selecting the box beside
Automatic Sync.
toggles between
On
and
Off
.
Select the box beside
Time Server
, and a virtual keyboard
appears that you can use to enter the IP address or domain
name of the time server. Or, select and then a time server
from the time server list.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Select the box beside
Interval
and set the time interval for
synchronization from 30 minutes to 1 day at various time
intervals.