Apollo MRH Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 74

Apollo MRH Series Скачать руководство пользователя страница 52

Operating Manual

44

Live Monitoring

As soon as the DVR completes its initialization process, it will begin showing live video on the attached monitor and
playing live audio through the attached speaker. The default mode is to display all cameras at once. Clicking any camera
screen will cause that camera to display full screen. It displays live video and plays live audio until the user enters
another mode.

While in the live monitoring mode, moving the mouse pointer to the top of the screen displays the following Live Monitoring
menu. You can select menus and items by clicking the mouse left button.

Freeze

Sequence

Camera Menu

Alarm Reset

Panic

Setup

Search Mode

Login/Logout

Figure 59 — Live Monitoring menu.

Live Monitoring Menu

Freeze

Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
While in the Freeze mode, the icon displays in bottom-left corner if

Freeze

is selected in the Display setup screen

(OSD tab).

Sequence

Selecting   (Sequence) in the Live Monitoring menu causes the cameras to display sequentially.  When in one of the
multi-view formats, pressing this button will cause the DVR to go through predefined screen layouts (Full Sequence).
Or, the bottom, right screen will display live cameras sequentially (Cameo Sequence) (8- and 16-channel models only).
For example, if you select   (Sequence) in the 2x2 format, the DVR changes pages as follows:

< Full Sequence >

< Cameo Sequence >

Selecting again exits the Sequence mode. While in the Sequence mode, the icon displays in bottom-left corner
if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a page are Off, or have lost video
or are set to Covert (unless the user has authority to view covert cameras), that page will be excluded from the sequence.

NOTE: The

Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence

monitoring should be selected in the Display setup screen (Main Monitor tab).

«
...
50
51
52
53
54
...
»

Содержание MRH Series











































































Отзывы:

Нет отзывов