Apollo MRH Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 74

Apollo MRH Series Скачать руководство пользователя страница 30

Operating Manual

22

Select the box beside

DVR Name

, and a virtual keyboard appears allowing you to enter the DVR name to be registered

on the DVRNS server.

Select the

Check

box to check whether or not the name you entered can be used.

NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will

not be saved.

When entering no name or a name already registered on the DVRNS server, an error message displays.

Selecting

Save

registers the DVR on the DVRNS server. Proper DVRNS settings will display the help desk information

of the DVRNS server in the box beside

Help Desk

.

PATH: Network menu > Network > RTSP tab

Figure 22 — RTSP setup screen.

Select

Enable RTSP

(Real-Time Streaming Protocol) to

toggle between On and Off.

Select the box beside

RTSP Port

, and set the port number

of the RTSP server obtained from your system administrator
by using the Up and Down arrows.

Select the box beside

RTSP Start Port

, and set the start port

number of the RTP server obtained from your system
administrator by using the Up and Down arrows.

Select the box beside

RTSP End Port

, and set the end port

number of the RTP server obtained from your system
administrator by using the Up and Down arrows.

Select

Use Mobile

to toggle between On and Off. When set to on, you can access a remote DVR using a Blackberry

or other mobile devices.

Select the box beside

Mobile Port

, and set the port number of the web server obtained from your system administrator

by using the Up and Down arrows.

NOTE: When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you

to access a DVR using Blackberry and Android devices.

You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter “rtsp://ID:Password@IP
address:RTSP port number/track ID=‘channel number’”, or start Internet Explorer on your Blackberry
or other mobile devices and enter “http://IP address:Mobile Port number/”.

Some media players might play video properly depending on network conditions.

RTSP service might not be supported, depending on the type of media player.

Notification

Select

Notification

in the Network menu, and the

Notification

screen displays.

«
...
28
29
30
31
32
...
»

Содержание MRH Series











































































Отзывы:

Нет отзывов