APM SP-300 Series, Руководство пользователя

Страница: 80 / 132

Low Limit : lower limit of parameter settings.
High Limit : upper limit of parameter settings.
Switch : selectable to Disable or Enable.
Delay Time : the delay time to enter into test mode when output is turned ON.
Test Time : duration of measurement and limit compare period.
Remaining Time : the time remaining in the test process.
1. In the ‘Output Mode’ screen press the ‘Test Mode’ soft key to enter limit test mode.
2. Press the ‘Save’ soft key to save the settings to non-volatile memory.
Note
If the remote I/O & Parallel Multiphase Link Card has been connected, the testing result
(PASS or FAIL) and the output state (ON/OFF) can be detected from Relay 1~3.
78
Once the output is turned on, the measurements will start and compare against the limits set
for the period of time programmed. A PASS or FAIL Result will be displayed when the total time
period is over.
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE 79
5 . 2.5 Store/Recall
The memory resources are access using
the following four soft keys:
Save Output
Save System
Recall Output
Recall System
This AC source provides 51 non-volatile memory registers to save instrument settings for rec-
alling at a later time. Parameters that may be saved include ‘Vac’, ‘F’, ‘Vdc’.
1. Save Output/Recall Output
1. Press the ‘Store/Recall’ to save an output setting.
2. Move the cursor to the Channel field located in the middle of the screen. Use [0]~[9] keys to
select a channel number from 1 through 51 and press [Enter] key to save the output settings
to this Channel register.
3. To recall the output settings stored in Channel [3] for example. Press the ‘Recall Output’ soft
key, then move cursor to the Channel field, use [3] + [Enter] keys to recall the output settings.
In the ‘Main Page’ screen press the ‘Save/Recall’ soft key to enter the save/recall sub-menu.
5 . 2.4 Parallel/Series/3-Phase
For details on Master-slave mode operation, please refer to Chapter 6.
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE