APM SP-300 Series Скачать руководство пользователя страница 8

Страница: 8 / 132

About this Manual

1-1

1.1 Scope

1.2 Targeted Audience

1.3 Use of this Manual and Legal Notices

This manual provides the reader with detailed product information as well as installation,

operation and maintenance instructions. This manual also provides our company contact

information so that you can tell us your suggestions and comments about the performance

of our products in order that we can continue to improve our product quality and our level of

service.

This manual is intended for product users and technical personnel that are involved with inst-

alling, operating and maintaining the product. Readers are required to have a certain degree

of electrical and mechanical knowledge and be familiar with basic electrical and mechanical

schematics.

All materials ( including but not limited to graphics, logos, symbols, data, etc.) in this manual

are owned by the APM Technologies. No part of this manual can be reproduced without prior

authorization from APM Technologies.

The content of this manual will continue to be updated and revised as inevitably there are slight

discrepancies or errors. Please check for updates at en.apmtech.cn and download the latest

version of this manual and information.

It is prohibited in any way to use all or part of the firmware or software developed by APM

Technologies for other commercial purposes. It is prohibited to decompile, decrypt or otherwise

damage the software developed by APM Technologies.

About this Manual

PROFESSIONAL INNOVATIVE BRANDING SERVICE

2.1 Packing List

Unpacking

SP-300 Series Programmable AC Power Supply

Rack Mount Brackets

Output Terminal Cover Box

Input Terminal Cover Box

Screws

RS-232 Communication Cable

LAN communication Cable (568A-568B)

Power Cord

USB Communication Cable

GPIB Communication Cable

System Bus Communication Cable (DVI)

BNC Cable

Quick Guide

As ordered

Standard

Fasten item B

Standard

Optional

English Version

Descriptions

Item

[1]

The LAN communication cable is optional for 2U units.

2U model is standard with three-pin plug power cable (16A). 3U/4U model is standard with power cable(1.5M).

[2]

Quantity

Remarks

Unpacking

[1]

[2]

PROFESSIONAL INNOVATIVE BRANDING SERVICE

Содержание SP-300 Series





































































































































Результаты поиска

Содержание SP-300 Series

Отзывы:

Похожие инструкции для SP-300 Series

Бренды по названию

Популярные бренды

APM SP-300 Series, Руководство пользователя

Результаты поиска

Содержание SP-300 Series

Отзывы:

Похожие инструкции для SP-300 Series

Бренды по названию

Популярные бренды