Apex Digital XA3300 Скачать руководство пользователя страница 49

Страница: 49 / 116

Reloading Procedure

It is very important to clean and purge the tank and discharge plumbing after each load.

This will prevent ‘clumping’ of material, which could result in a blockage in the discharge

plumbing.

1. Fill the tank to the bottom of the agitator shafts with water.

2. Engage the agitator in both directions to dislodge material in the tank.

3. Begin by spraying water through the primary and secondary discharge cannons.

Continue spraying until the discharge water is clear.

4. Spray water through the discharge hose. Continue spraying until the discharge

water is clear.

5. Open the recirculation valve and cycle material through the recirculation plumbing

until the water is clear.

6. Follow steps for “Mixing Material” on page – of this manual.

CLEANING AND MAINTENANCE

Daily- Cleaning the Applicator

After the last load of the day, fill the tank with sufficient water to rinse the inner tank

walls. Purge the discharge plumbing with water (steps 1-5 in the Reloading Procedure)

to remove the mulch materials from the pipes. If hose work was undertaken- rinse the

interior of the hose as well.

Hydroseed material can produce gases that are

harmful or deadly if inhaled. Empty the slurry tank

daily to prevent build-up of these gases.

Do not store material for long periods of time in

the slurry tank. Harmful or deadly gases could

result.

1. Turn off the slurry pump, move the valve handle to the DISCHARGE position,

move the agitator handle to NEUTRAL and turn off the engine.

2. Always remove the main drain plug and allow the tank to drain.

Содержание XA3300





















































































































Результаты поиска

Содержание XA3300

Отзывы:

Apex Digital XA3300, Инструкция по эксплуатации и запасным частям, Страница: 49 / 116

Результаты поиска

Содержание XA3300

Отзывы: