Apex Digital XA3300 Скачать руководство пользователя страница 37

Страница: 37 / 116

4. Press the E-Stop Button to shut off the

engine in the event of an emergency.

Twist the E-Stop button clockwise to

reset.

The engine will not start with the E-Stop

button depressed.

Use the Emergency Stop Button only when immediate

and definite danger to personnel or machine damage

are imminent. Shutting off the engine at high RPM can

cause engine damage.

5. The Discharge light will blink whenever

the slurry pump is engaged, whether at

the Operator Control Panel or the GLC.

LOADING PLATFORM

The Loading Platform is where the Loading Hatch is located. There is an E-Stop button

located within easy reach of the Loading Hatch.

Emergency Stop Button

The Emergency Stop Button is located on the railing separating the Loading Platform

from the Operator Platform. Depressing the button will shut off the engine immediately.

•

Twist clockwise to reset.

Use the Emergency Stop Button only when immediate

and definite danger to personnel or machine damage

are imminent. Shutting off the engine at high RPM can

cause engine damage.

Содержание XA3300





















































































































Результаты поиска

Содержание XA3300

Отзывы:

Apex Digital XA3300, Инструкция по эксплуатации и запасным частям, Страница: 37 / 116

Результаты поиска

Содержание XA3300

Отзывы: