Apex Digital XA3300 Скачать руководство пользователя страница 32

Страница: 32 / 116

Controller Master Display

The XA4000 utilizes a Controller Master Display to communicate with the engine and

other systems on the applicator. This allows for easy adjustments to the agitator pump,

slurry pump and other outputs This display will also alert the operator to any error

messages it detects. This display is mounted in the Operator Control Panel at the

Operator Platform and functions via the touchscreen or the buttons, for gloved use.

Functions that are in, but not limited to, the Controller Master Display:

•

Engine RPM

•

Hydraulic oil temperature

•

Engine coolant temperature

•

DEF level

Warnings that are in, but not limited to, the Controller Master Display:

•

Hydraulic temperature

•

Engine coolant temperature

•

Low engine oil pressure

Home Screen

The Home Screen displays the engine

RPM, hydraulic oil temperature, coolant

temperature, DEF level, the agitator engage

percent and the slurry pump engage

percent.

From the Home Screen, the operator can

access other screens that display pertinent

data along with adjustments to suit the

operator or the specific jobsite.

The Check Engine Lamp (CEL) and Stop

Engine Lamp (SEL) are located on the

Home Screen. Further information on these

lamps is located on the Engine Screen.

Press the START button to start the

engine.

Press the STOP button to turn the engine

off.

Slurry Pump Control

The Pump Control Screen is accessed by pressing the RUN button on the Home

Screen. Press the green PUMP button to engage the slurry pump. Press the PUMP

button to disengage the slurry pump

. Use the TURTLE and RABBIT arrow buttons to

decrease or increase the speed of the engine

The pump control will default to the minimum setting to avoid accidental discharge of

material at engine startup.

Содержание XA3300





















































































































Результаты поиска

Содержание XA3300

Отзывы:

Apex Digital XA3300, Инструкция по эксплуатации и запасным частям, Страница: 32 / 116

Результаты поиска

Содержание XA3300

Отзывы: