Apex Digital XA3300, Инструкция по эксплуатации и запасным частям, Страница: 43 / 116

40
Hydroseed material can produce gases that are
harmful or deadly if inhaled. Empty the slurry tank
daily to prevent build-up of these gases.
Do not store material for long periods of time in the
slurry tank. Harmful or deadly gases could result.
Take care not to drop objects into the tank. Failure to
do so could result in minor to moderate personal
injury. Failure to comply could also result in product
or property damage.
Keep operators and bystanders away from moving
parts.
Contact with rotating equipment can cause serious
injury or death.
Do not wear loose clothing or jewelry that could get
caught in the agitator. Contact with rotating equipment
can cause serious injury or death.
As the ratio of water and materials changes, it may become necessary to suspend
mixing and allow the water level to increase in the slurry tank. Return the Mix control to
NEUTRAL to do this. Once the water level reaches an appropriate level simply engage
the controls to MIX and allow product to blend within the tank.
Note- If filling water from a pond or stream it is recommended that a suction
strainer be used to prevent any foreign objects from entering the tank. These
objects could cause damage to the pump.
Additionally, it is imperative that all local laws and codes be followed if filling the
tank from a public water source.
Begin by adding the lightest materials first. If using powdered products (lime, seed,
tackifiers) add these first to prevent any “gumming” of product. This will also
insure equal dispersion of the product.
Only when adding hydraulic mulches, BFM’s or baled type products, open the grate on
the hatch.
Operating the applicator with the hatch open is
extremely dangerous and could result in severe injury
or death. Be careful to keep all personnel a safe
distance from the open hatch.