Apex Digital XA3300, Инструкция по эксплуатации и запасным частям, Страница: 24 / 116

21
Many operators overlook vital aspects of the walk-around such as fluid type and
quantity. To maximize the effectiveness of a fluid it must be the proper viscosity and
quality at starting temperatures. Next in degree of importance is the fluid quantity. Too
much fluid can be as harmful as too little fluid. Be sure all fluids are in the proper level
range and refer to the Fluid Specifications and Tank Capacities Chart on Page - of this
manual whenever replacing or adding fluids.
•
The walk-around should be performed before each shift and before moving the
machine or even starting the engine.
•
The following describe in detail the recommended items to be checked, whether
it is a daily check (every 8 hours) or a weekly check (every 40 hours).
Once the Pre-Operation Walk-Around is complete a final inspection should be done by
operating the applicator for a short period of time. Stop the unit and check the gauges
and display screen.
Daily Pre-Operation Checklist
Before operating the applicator it is important to inspect the following items for safety
and performance.
CHECK EVERY 8 HOURS (DAILY)
1. Refill Fuel and DEF
2. Check engine oil level
3. Check engine coolant level
4. Check hydraulic fluid level
5. Check fuel/ water separator
6. Check hydraulic filter restriction indicators
7. Verify that all lighting is in working order
8. Inspect that all railings are in place and secure
9. Inspect that all safety guards are in place
10. Inspect that the mixing tank is free from foreign objects
CHECK EVERY 40 HOURS (WEEKLY)
1. All Safety Decals
2. Safety surfaces for wear
3. Check hydraulic hoses for any wear
4. Check engine air filter for clogs and debris