-B284SB0*1K**P30 4/16-
DP
DN
24V
0V
POWER IN
SLAVE
LG
24V
0V
L N FG
〜
DP
DN
DP
DN
24V
0V
DP
DN
ANF-01
24V
0V
24V
0V
PE
AnyWireASLINK
master
Black:
DN
Red:
DP
24V DC*
■
Example of mixed installation with 2-wire (non-isolated) and
4-wire (isolated) terminals
Black: DN
Red: DP
White: 0V
Green: 24V
16 points
Black: DN
Red: DP
Black: DN
Red: DP
1 point
Black: DN
Red: DP
1 point
4 points
Black: DN
Red: DP
Black: DN
Red: DP
Black: DN
Red: DP
2 points
2 points
8 points
4P link connector is
convenient for
branching.
The sum of the
portions of DP, DN is
the total line length.
The branching
has no limitation.
AnyWireASLINK terminator
One terminator should be connected to the DP, DN
terminal farthest from the AnyWireASLINK master unit.
Connect it correctly so as not to set the wrong polarity.
2 points
2 points
2 points
2 points
Black: DN
Red: DP
Black: DN
Red: DP
Black: DN
Red: DP
2 points
2 points
2 points
8 points
Dedicated flat cable
1.25mm
2
(4-wire)
To connect loads (e.g. I/O ports) that are
controlled with a power supply other than
the one used for the AnyWireASLINK
system, always use a 4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
ASLINK
filter
Gener
al-pur
pose
po
w
er suppl
y f
ilt
er
24V DC*
[Notes on Combined Use of 4-Wire (Isolated) Terminal]
If the total length of the sections where all the DP, DN, 24V, and 0V lines run in
parallel in the power supply system is more than 50m, connect an ASLINK filter
(Type ANF-01) or a filter manufactured by COSEL Co., Ltd. (Type EAC-06-472) in
series to the 24V and 0V lines at a position where these four lines start running in
parallel.
This will improve noise resistance, suppress the adverse effects of crosstalk caused
by transmitted signals, and stabilize signals.
The above filters must be inserted regardless of whether power is supplied to all
terminals collectively from the power supply for the master or power is supplied to
each terminal individually from their local power supply.
Insert the “ASLINK filter [Type ANF-01]” regardless of installation
method and distance when complying with CE Standard.
■
Filter allowable current
ANF-01
MAX 5A/24V DC
Filter of COSEL Co., Ltd. EAC-06-472 MAX 6A/24V DC
Product
Type
Allowable power current
ASLINK filter
〜
Terminator
■
AnyWire Type: ANF-01 Connection example
①
Power supply to the entire system
AnyWireASLINK master
24V DC stabilized
power supply
General-purpose power
supply filter
(Use it if necessary.)
2-wire
terminal
4-wire
terminal
If the total length of the section
where all the DP, DN, 24V, and 0V
lines run in parallel is more than 50m
〜
General-purpose
power supply filter
CAUTION
！
