AWG08-001 Audio Warning Generator
Installation and Operation Manual
January 21, 2019 Rev: 1.01
Page 1-1
ENG-FORM: 800-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Section 1.0 Description
1.1
Introduction
Information in this section consists of product description, design features and specifications for the AWG08
audio warning generator. All derivative product information will be contained in the applicable manual
supplement, which may be obtained from AEM as required.
Review all notes, warnings and cautions.
1.2
Product Description
The AWG08 Audio Warning Generator is a bulkhead mount unit intended for applications where an audible
warning is desired by the operator. The AWG08 can contain up to eight warnings in the form of a tone or
voice or combination thereof. The AWG08 provides two un-switched, adjustable (direct) auxiliary audio
inputs to be summed with the warning audio. Pre-summed input level is adjustable via externally accessible
trimpots. The AWG08 has two isolated and independently adjustable audio outputs, with built-in short circuit
protection.
The AWG08 can playback up to eight stored, audible warnings from individual trigger inputs. The audible
warnings are configurable using a personal computer (PC) Application. The audible warnings are stored in
an internal non-volatile memory and are user configurable to playback once (Single Shot) or to playback
continuously (Repeating).
The AWG08 can be configured as master/slave combinations to daisy chain multiple units.
The AWG08 includes a warning active output which is intended to connect to an external relay or an external
annunciator(s). The warning active output is active if the AWG08 is playing an audible warning.
