AWG08-001 Cabin PA Amplifier
Installation and Operation Manual
January 21, 2019 Rev: 1.01
Page 1-14
ENG-FORM: 800-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
1.4.3
Environmental
Specifications
Temperature
-45 to +70
C (operating)
-55 to +85
C (survival)
Altitude
35,000 feet max.
Humidity
95% Non-condensing
Operational Shock
6g for 11msec
Crash Safety
20g for 11msec (impulse), 3 sec (sustained)
Vibration
Conforms to DO-160G
category ‘S & U2’, waveforms C,L,F & F1
Note:
Refer to Environmental Qualification Form located in Section 2 of this manual for complete details
of the environmental categories.
1.4.4
Product Approval/Certification
Transport Canada: CAN-TSO-C139a Aircraft Audio Systems and Equipment
1.5
Product Limitations
1.5.1
Installation Procedures and Limitations
This article meets the minimum performance and quality control standards required by a technical
standard order (TSO). Installation of this article requires separate approval.
The AWG08-001 is not intended for installations with exposure to T-PEDs. The AWG08-001 is intended
for installation in a shielded enclosure (such as shielded avionics bay) as per the recommendations of
RTCA/DO-214A section 2.5.11
1.5.2
USB Connector Bonding [Non-TSO]
The USB connector was not tested to any bonding specification and is not intended for permanent
installation.
1.5.3
Audible Pop and Click Performance
Audible pop and click performance is dependant on the user configurable warning audio files and
settings. Depending on the file and user configurable settings, it may not be possible to completely
eliminate pops and clicks.
1.5.4
Power On Transients
The AWG08 emits an audible chirp during initial power application.
