AWG08-001 Cabin PA Amplifier
Installation and Operation Manual
January 21, 2019 Rev: 1.01
Page 1-12
ENG-FORM: 800-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
1.4.1.3
Output Signals
Audio Output
Quantity:
2
Circuit Type:
Single Ended
Rated Power:
100 mW (7.75 Vrms ± 10% in 600
) **
(Tone Audio)
70 mW (6.50 Vrms ± 10% in 600
) ^ **
Rated Load Impedance:
600
± 10%
Output Impedance:
≤ 60
Frequency Response:
≤ 3 dB from 300 Hz to 6 kHz
Distortion:
≤ 10% @ Rated Power,
≤ 10% @ 50% Rated Power,
≤ 3% @ 10% Rated Power,
Audio Noise Level:
≥ -60 dB from Rated Power
Adjustment Range:
Output:
17 dB
Tone Audio:
18 dB
Output Protection:
Diode protected to ±25 Vpk maximum
AC coupled (DC blocking)*
^Note:
Internally generated 1 kHz sign wave measured at the audio output.
*Note:
Emergency mode signals pass through with no AC coupling or DC
terminations.
**Note:
Configurable input summation settings may affect the factory set output
level. Adjustments may be made using the field adjustable settings to
compensate for the change.
Warning Active Output [Non-TSO]
Quantity:
1
Output Active:
GND (Active Low), <1 Vdc
Output Inactive:
+28 Vdc ± 20%,
Circuit Type:
2.2 k
Internal Pull-Up on Open Collector
Current Input:
250 mA maximum
Output Protection:
Diode protected to +45 Vdc maximum
