IRONING BOARDS
TV/S TV/SG1F TV/SG2F
ANGHINETTI & CAMPTEL S.r.l
Via XX Settembre 95 - 26040 - Gussola (Cr) Italy
Tel.: +39 0375 / 260885
•
Fax: +39 0375 / 260666
•
e-mail:
Page
19
of
48
– Rev. 01
5.
TRANSPORT AND
INSTALLATION
5.1.
G
ENERAL WARNINGS
A
TTENTION
!
The
lifting,
handling,
unload operations must be carried out
by personnel qualified for said tasks.
Avoid more persons simultaneously
working without an appointed and
qualified supervisor, as there may be
risky situations.
Forbid access to the transport and
handling area to all, except to the
requested operators.
No one must ever be within the load
overturning area.
Damages caused to the machine during
Transport and Handling are
not covered by WARRANTY.
The Customer is responsible for repair
or replacement of damaged parts.
5.2.
H
ANDLING AND
TRANSPORT
Given the machine's reduced sizes, it does not
necessarily require disassembly for its handling
using adequately sized forklift truck or
specific crane or hoist.
Professionally qualified Personnel must perform
Transport.
Operator in charge of handling
The Machine must be transported ensuring its
parts are not damaged
The
machine
does
not
require
disassembly
during
handling
and
transport given its reduced sizes.
The capacity of the forklift truck or
crane must be higher than the
machine's weight.
The following must be used during
handling of different components:
Accident-prevention helmet
Protective gloves
Accident-prevention shoes
5.2.1.
U
SING THE FORKLIFT TRUCK
To reduce risk of accident during machine
handling, transport and installation, it is necessary:
To moderate forklift truck speed;
Further slow-down run in case of turning
and passing in narrow areas;
Always signal manoeuvres using the
acoustic signal;
Do not use the forklift truck to climb to
work height. For operation at a height of
more than 1.5 m, stand on scaffolding
