IRONING BOARDS
TV/S TV/SG1F TV/SG2F
ANGHINETTI & CAMPTEL S.r.l
Via XX Settembre 95 - 26040 - Gussola (Cr) Italy
Tel.: +39 0375 / 260885
•
Fax: +39 0375 / 260666
•
e-mail:
Page
10
of
48
– Rev. 01
2.2.
C
OMMUNICATING WITH
AFTER
-
SALES ASSISTANCE
Use a copy of the specific form attached and always
refer to the following data when contacting the
After-Sales Technical Assistance Service:
Machine type
Serial number
Year of manufacture
ANGHINETTI & CAMPTEL S.r.l
,owner of the
CAMPTEL
trademark, directly assists its products
sold in Italy and Europe.
For any need on use, maintenance or request of
spare parts, the Customer
must contact the
single After-Sales Assistance
Centre or dealer
in your area. Contact the
manufacturing company is you do not know any
after-sales assistance centres or dealers
ANGHINETTI & CAMPTEL S.r.l
Tel. +39 (0) 0375 / 260885
Fax. +39 (0) 0375 / 260666
e-mail: [email protected]
IN CASE OF ASSISTANCE OR SPARE
PARTS, ALWAYS COMMUNICATE THE
SERIAL NUMBER ON THE
IDENTIFICATION
PLATE
See paragraph 2.1
2.3.
G
ENERAL INFORMATION
ON AFTER
-
SALES
TECHNICAL ASSISTANCE
AND MAINTENANCE
Check any malfunctioning does not fall within the
operations
described
for
“
scheduled
maintenance” (refer to paragraph 7.5
); on the
contrary, contact the Manufacturing company's
After-Sales Assistance Service.
The
non-compliance
with
chapter
7
maintenance
, lifts
ANGHINETTI & CAMPTEL
S.r.l
,from any responsibility in case of personal
injuries and/or damage to property and machine
operation faults.
2.4.
W
ARRANTY TERMS
The Warranty on Machine Components has a
12
month
validity on any mechanical, electric,
electronic, pneumatic and hydraulic part with an
eight-hour day of operation, starting from the data
on relative
Delivery Note
. Said period is halved
for more severe working conditions.
The Warranty only includes replaced parts,
excluding labour
.
As long as the machine is used in accordance with
the Manufacturer prescriptions (installation, use,
maintenance
and
performance
limits)
the
Manufacturer commits to supply the faulty pieces
or parts for evident manufacturing vices under the
warranty period, free of charge, within minimum
technical times and ex works.
The Customer will be charged with transfer,
shipment, labour costs and anything else is required
for replacement. The Manufacturer will be
responsible for the costs of the replaced piece.
